Water play structure 0-34354-501

Technical Specifications
Floor area: 3.65 x 5.60 m
Main room: 6.65 x 8.60 m (43 m²)
Overall height: 1.65 m
Pedestal height: 0.60 m
Free fall height: 0.80 m
Weight: 85 kg, heaviest single component
455 kg in total

Post for a fence
Stanchion post made of stainless steel tube, Ø 120 x 3 mm, covered with non-removable stainless steel post caps.

Podest floor
Platform base made of 30-mm-thick boards and continuous timber joists measuring 45 x 100 mm. The kiln‑dried robinia lumber is planed, chamfered, and free of decay knots. Positive‑locking floor fastening achieved with special stainless‑steel brackets and a continuous bolted connection.

The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment helps reduce cracking. The screw connections are secured against unauthorized loosening.

Add-on components
– Anti-rollover bracket railing, made of stainless steel tubing, Ø 33.7 x 2 mm
– Stair railing made of stainless steel tubing, Ø 33.7 x 2 mm
– Robinia wood balustrade, 125 x 30 mm, mounted between stainless steel tubes Ø 33.7 x 2 mm

K&K Water Pump, Item No. 0-33130-001
Suction pipe connection 1¼ inches (pipe diameter at least ¾ inch), welded stainless steel construction, encapsulated pump housing, pump mechanism with rolling and plain bearings, the upper pump housing with yoke must be removed during the frost period; a closure cover (“winterization plate”) for the remaining lower pump section is supplied.

Please note:
To connect the water pump to a pressurized water line, a K&K valve assembly (part no. 0-33190-000 or 0-33195-000) is required.

When a temporary interruption of the water supply is intended (e.g., via a timer), further operation of the pump will create a vacuum in the piping system, causing the pump lever to retract.
It is therefore imperative to prevent the pump lever from being operated (for example, by using the pump lock, item no. 1040639).

In addition, please refer to the frame dimensions specified in the installation instructions (clearances, pipe diameters, etc.); these can be obtained upon request from K&K or downloaded directly as a PDF from our website at www.kaiser-kuehne-play.com.

Flanged pipe, item no. 1040065
Flanged pipe for screwing onto the K&K water pump.
For concrete placement below the playing surface.

K&K conveying basin
Welded stainless steel structure with a mounting bracket for the base of the water spiral, featuring a drain hole. Sheet thickness min. 2 mm / pipe Ø 38 mm.
A suitable ring foundation (015168) for anchoring to the flange ring, along with formwork blocks (015169) for building up and leveling height differences or for secure foundation in loose fall protection materials (sand, fine gravel, etc.), can be supplied at an additional cost.

K&K Water Spiral
Length: approx. 1.50 m
Outer diameter: 25 cm
Welded stainless steel structure with top and bottom bearings, for attachment to posts.

K&K Collection Basin
Welded stainless steel structure for water collection, featuring two water drainage outlets. Sheet thickness min. 2 mm / pipe diameter 38 mm, designed for attachment to posts.

K&K water trough, 1.60 m, 2 pieces
Welded stainless steel structure, 0.80 x 1.60 m, with a minimum sheet thickness of 2 mm and round tubing Ø 38 mm. Equipped with mounting brackets for the base post and an additional support system to enable stepless adjustment of the gutter’s slope. Beveled outlet. Includes a positionable stop flap, a stainless steel handle, and a rubber blade with fabric reinforcement.

K&K Water Table (25) Item No. 0-33445-000
Floor area: 0.84 x 1.84 m
Overall height: 0.40 m
Welded stainless steel construction with one water drain pipe. Rubber cone plug with locking mechanism for complete water removal. Four shelves. Sheet thickness: minimum 2 mm / pipe diameter 38 mm. Anchoring via flange ring.
Matching ring foundations (15165) for anchoring to the flange ring and formwork blocks (15170) for building up and leveling height differences, or for secure foundation in loose fall protection materials (sand, fine gravel, etc.), can be supplied at an additional cost.

K&K Water Bowl (25) Item No. 0-33430-000
Floor area: 0.84 x 1.00 m
Overall height: 0.40 m
Welded stainless steel construction with one water drain opening. Sheet thickness: minimum 2 mm / pipe diameter 38 mm.
A suitable ring foundation (015165) for anchoring to the flange ring, along with formwork blocks (015170) for building up and leveling height differences or for secure foundation in loose fall protection materials (sand, fine gravel, etc.), can be supplied at an additional cost.

Foundations (provided on site)
6 pcs. 0.40 x 0.40 x 0.40 m
3 pcs. 0.50 x 0.50 x 0.50 m
Concrete volume: 0.8 m³

Assembly time
2 installers for 2 hours.
(without foundation construction, without water connection)

Suitable for
Children aged 4 and up,
public playgrounds, etc.,
manual activities