Water play structure 0-34152-501

Technical specifications
Floor area: 2.85 x 5.35 m
Living room: 5.80 x 8.35 m (37 m²)
Overall height: 1.60 m
Pedestal height: 0.40 m
Weight: 65 kg, heaviest single component
445 kg in total

Post for a fence
Stanchion posts made of stainless steel tubing, Ø 120 mm, capped with non-removable stainless steel caps. Stanchion posts that are flush with the platform are covered with welded stainless steel washers.

Podest floor
Platform base made of 30-mm-thick boards and continuous timber joists measuring 45 x 100 mm. The kiln‑dried robinia lumber is planed, chamfered, and free of decay knots. Positive‑locking floor fastening is achieved using special stainless‑steel brackets with a continuous bolted connection.
Profiled stainless steel sheet.

Add-on parts
– Stair railing made of stainless steel tubing, Ø 33.7×2 mm

K&K Water Pump Item No. 0-33130-001
Suction pipe connection 1¼ inches (pipe diameter at least ¾ inch), welded stainless steel construction, encapsulated pump housing, pump mechanism with rolling and plain bearings; the upper pump housing with crank must be removed, for example during frost periods; a closure cover (“winterization plate”) for the remaining lower pump section is supplied.

Please note:
When connecting the water pump to a pressurized water line, the K&K valve assembly (part no. 0-33190-000) is required.

When a temporary interruption of the water supply is intended (e.g., via a timer), further operation of the pump will create a vacuum in the piping system, causing the pump lever to retract.
It is therefore imperative to prevent the pump lever from being operated (for example, by using the pump lock, item number 1040639).

In addition, please refer to the frame dimensions specified in the installation instructions (clearances, pipe diameters, etc.); these can be obtained upon request from K&K or downloaded directly as a PDF from our website at www.kaiser-kuehne-play.com.

K&K Water Distribution Table (50) Item No. 0-33480-000
Welded stainless steel construction with two water drain pipes. Rubber cone plug with locking mechanism for complete water removal. Sheet thickness: minimum 2 mm; pipe diameter: 38 mm.

K&K water channel 2.40 m / water wheel 0.60 m
Welded stainless steel structure with a support frame and water channel. Sheet thickness: minimum 2 mm. The water wheel consists of 12 blades, flange‑bent on the end face and enclosed by side walls. The wheel is mounted on rolling bearings.
Includes a damper flap, freely positionable; stainless steel handle; rubber blade with fabric reinforcement.

K&K Water Gutter 1.60 m
Welded stainless steel structure with a support frame and water trough. Sheet thickness min. 2 mm.

K&K Mud Plate (50) Item No. 0-33451-000
Welded stainless steel structure with 6 water drain openings. Sheet thickness: minimum 2 mm; pipe diameter: 38 mm. Anchored to the flange ring.
A suitable ring foundation (15165) for anchoring to the flange ring, along with formwork blocks (15170) for building up and leveling height differences or for secure foundation in loose fall protection materials (sand, fine gravel, etc.), can be supplied at an additional cost.

Metal components: stainless steel.
The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment helps minimize cracking. The modular attachments transfer their loads directly into the support posts via a specialized adapter fastening system. The screw connections are secured against unauthorized loosening.

Foundations (provided on site)
6 pcs. 0.40 x 0.40 x 0.40 m
3 pcs. 0.50 x 0.50 x 0.50 m
1 pc. 0.50 x 0.70 x 0.50 m
Concrete volume: 1.01 m³

Assembly time
2 installers per 1.5 hours.
(without foundation construction, without water connection)

Free fall height
0.90 m

Suitable for
Children aged 4 and up,
public playgrounds, etc.,
manual activities